Ready-mix concrete supplier
for specialist contractors.
Volumetric and drum-mixer ready-mix concrete batched to BS EN 206 and BS 8500. BSI Kitemark certified, 74-mix catalogue, batch-stamped tickets, plants on rotation for continuous pours.
What We Supply
Every pour a contractor calls for
From single-wagon specialist pours to multi-load slabs. Independently certified mixes, batch-stamped tickets, in-house pumping where you need it.
Foundation pours
C20/25, C32/40
Strip footings, trench fill and raft foundations. Mix grade and slump printed on every delivery ticket.
Slabs & oversite
C25/30, C32/40
Industrial floors, garage floors, extension oversites. Standard or heavy-duty grades available across our 74-mix catalogue.
Structural pours
C32/40, C40/50
Higher-strength mixes for load-bearing pours. Batched at our BSI Kitemarked plants under BS EN 206 / BS 8500.
Driveways & paving
C28/35, C32/40
Domestic and heavy-duty traffic surfaces. Air-content advice on request for external pours.
Floor screed
CT-grade screeds
Bonded, unbonded and floating screeds for finishing trades. Delivered fresh from the same batching network.
Pumped concrete
Any grade
In-house pump fleet, line and boom. One booking, one invoice, no third-party scheduling.
Multi-load pours
Any grade
Plants on rotation for larger pours. Wagon interval scheduled to your pour rate so you finish before initial set on the first load.
Small-volume specialist
Any grade
1m³ minimum, no small-load surcharge. Useful when a job needs a high-grade mix in a single wagon.
Why Choose Us
Why specialist contractors stay with us
Spec is sacred
Order what your engineer signed off and that's exactly what arrives. Ticket prints mix grade, slump, batch number and time, every load.
BSI Kitemark certified
Our concrete carries the BSI Kitemark, independently tested and verified against the standard. Audit-ready paperwork on request.
BS EN 206 & BS 8500 compliant
Concrete produced to the European concrete standard and the British complementary standard. Conformity stated on every delivery.
Plants on the same network
A breakdown at one plant doesn't stop your pour. Loads re-routed through our other batching plants without you having to call.
No small-load surcharge
Specialist pours often need 1-3m³ of high-grade mix. We don't penalise small-volume orders the way the nationals do.
30-day trade terms
Approved in 48 hours with two trade references. Monthly statement, project-coded invoicing if you prefer.
Rated 4.9 out of 5 across 251 Google reviews from homeowners, builders, and contractors across the Midlands.
Common Questions
Ready-mix concrete: the basics
How much is ready-mix concrete?
Ready-mix concrete prices vary by mix grade and volume, typical UK domestic mixes (GEN3, C20/25) sit around £100-£140 per m³, with higher-grade structural mixes priced higher. Use our concrete calculator to estimate volume, then get a live quote on the order page.
What is ready-mix concrete?
Ready-mix concrete is concrete batched at a plant to a specified mix design, cement, aggregates, water and admixtures combined in controlled proportions, then delivered fresh to site by mixer wagon. It saves the time and inconsistency of mixing on-site and gives you a known performance grade with paperwork to match.
How much concrete do I need?
Volume = length × width × depth in metres, plus around 10% for wastage and over-dig. Our concrete calculator does this for you and rounds to what we can deliver. For volumetric loads we round to the nearest 0.5m³; drum-mixer loads round to the nearest full cubic metre.
Where can I buy ready-mix concrete near me?
We deliver ready-mix concrete across the Midlands from plants in Coventry and surrounding areas. See our locations page for the full coverage map. 1m³ minimum, no small-load surcharge, next-day slots subject to availability.
How do I prepare for a concrete delivery?
Confirm the wagon access route the day before, minimum 3m width and 4m height for a standard 8-wheel wagon. Have your shutters / edge boards in place, the dig clean of debris, and at least two people ready with rakes and shovels at the discharge point. We discharge directly off the chute, or via pump if you've booked one.
What is the minimum concrete delivery?
1m³ on most domestic deliveries, with no small-load surcharge. Higher-grade structural mixes occasionally have a higher minimum, confirm when you book.
FAQ
Audience-specific questions
Are the mixes independently certified?
Yes, our concrete holds the BSI Kitemark. That means it's been independently tested and verified, with regular audits to maintain certification. Read more on our Accreditations page.
Which standards do you produce concrete to?
BS EN 206 (the European concrete standard) and BS 8500 (the British complementary standard). Both are stated on the accreditations page and reflected in our delivery documentation.
Do you provide batch and conformity paperwork?
Yes. Every load ticket prints mix grade, slump, batch number and time. Statement-of-conformity paperwork against BS 8500 is available on request, project-bound.
How do you handle large continuous pours?
Larger pours are scheduled with two or three plants on rotation. We agree the wagon interval before the day so initial set on the first load isn't exceeded.
Can we get one invoice per project?
Yes. Set up a project code on your trade account and every load against that code is consolidated onto a single monthly invoice, clean for cost-coding.
What's the minimum order?
1m³, with no small-load surcharge. Useful for the specialist pours that don't justify a full wagon but still need a high-grade mix.
Ready to book your next load?
Call before 4pm for next-day delivery, or open a trade account online.